Tie Down Rings

1/2" x 6" Zinc plated machine bolts.
"Through" bolt or lag style available.

Black Nylon Cleats

Almost unbreakable and resistant to salt and sun damage. Use two 5/16" flat head bolts to fasten down. Available in 8" or 10".

Aluminum Safety Cleats

Tired of stubbing your toe on cleats? This cleat lays flat when not in use and is rounded on the edges. Unlike some of the imitations that break, this is cast from almag 35, a true marine grade of aluminum, and is extremely strong and corrosion resistant. It can be bolted down from the top. Uses 3/8" fasteners. Comes in 6" or 8".

Nylon Fold Down Cleats

Cleat can be fully hidden when not in use - reduces tripping hazard. Made of a nylon composite it is strong and durable. With the angled sides, it can be driven over - when seated. Will not rust or corrode. Can bolt to existing boat docks or any flat surface: docks, boats, trailers, truck beds, work vans, garages, hangars, etc. Uses 1/4" fasteners. Available in White or Black and in 6" or 9".

Galvanized Steel Cleats

Steel cleats are made from malleable iron and then hot-dipped galvanized. Uses hex head bolt. Available in 8", 10" or 12".

12" Aluminum Cleats

Cast aluminum cleats are made of a non-corrosive alloy which gives a long life even in saltwater. Fasten with 3/8" hex head bolt.

Ship Cleats

Our ship cleats are Heavy-Duty, Hot-Dipped Galvanized Iron. Uses Hex Head Bolt.

C-040808 - 8"
C-040810 - 10"
C-040812 - 12"
C-044815 - 15"

Stainless Steel Ultra Cleats

The ultimate in fold down / flip up cleats. Same safety features as other fold down cleats, with the added benefit of Stainless Steel. Available in 6" and 8”"

C-UC-SS-6 - 6"
C-UC-SS-8 - 8"

DOCK EDGE + FLIP-UP™ Cleats

Cast from solid Marine Grade Almag 35 aluminum and powder coated white or burnished using a special process to give a traditional metallic finish. Distinctive and highly functional.

DE-2606P-F - 6"
Aluminum, Polished

DE-2606W-F - 6"
White, Almag 35

DE-2608P-F - 8"
Aluminum, Polished

DE-2608W-F - 8"
White, Almag 35

SOLAR DOCK CLEAT
Part No. #96-288-F

Attractive and functional with powerful solar charging performance & mooring strength.

• Cast aluminum alloy chassis
• Wide, sturdy base footprint
• 5 Super bright white LEDs for side and base illumination (18000 milli Candela each)
• Polycarbonate side lenses
• Epoxy Monocrystalline solar panel
• Rechargeable, replaceable AAA (Ni-MH) battery
• Waterproof to standard IP65
• Up to 12 hours illumination from a single charge
• Automatic an-at-dusk
• Viewing distance up to 325 ft. (100m)
• Optimal working temperature -4°F to +140°F (-20°C to +60°C)
• Dimensions: W= 10" (254mm) D= 3.9" (100mm) H= 3" (75.4mm)
• 1.9 lbs.
• 10.5" x 4.5" x 4" Packaging Dimensions
• UPC No. 776113962886